Table of Contents
Advertisement
Basic appliance care
programme
To ensure that you achieve optimal
drying results again and again, you can
run the basic appliance care
programme.
After a certain period, your
Note:
appliance will automatically recommend
that you run the basic appliance care
programme. It will do this in the form of
a message, ''§", which will be shown
on the display panel before the
programme starts for 5 seconds, and
again once it has ended. This message
will appear repeatedly until you have run
the basic appliance care programme
through to the end.
Caution!
Material damage/damage to the
appliance
Boiling water may damage the
appliance and the condensation
container. Do not pour boiling water into
the condensation container.
If you are using a drain hose to
discharge the condensation, carry out
the following steps before running the
appliance care programme:
Pull the condensation container out
1.
fully from the appliance.
Remove the filter and then the
2.
stopper from the recess in the top of
the condensation container.
Insert the stopper on the underside.
3.
Push the condensation container
4.
into the dryer until you feel it lock
into place.
If you are using a drain hose to
Note:
discharge the condensation, carry out
these steps in the reverse order after
running the appliance care programme.
To start the appliance care programme:
Switch the appliance on if it is off.
1.
Remove all items of laundry.
2.
Clean the fluff filter. ~ Page 28
3.
Select the programme in position 1.
4.
Touch and hold the Iron Dry S
5.
button, and select the programme in
position 4.
'˜‚ and the programme length will
now alternate on the display panel.
Cleaning
en
33
Advertisement
Table of Contents
