Table of Contents
Advertisement
Steam
Adding this option to a wash cycle helps provide
superior cleaning performance. Using steam gives
fabrics the cleaning benefits of a very hot wash.
• Steam may not be clearly visible during steam
cycles. This is normal. Too much steam could
damage clothing.
• Do not use steam with delicate fabrics such as
wool and silk, or easily discolored fabrics.
WARNING
• Do not touch the door during steam cycles. The
door surface can become very hot and can cause
severe burns. Allow the door lock to release
before opening the door.
• Do not attempt to override the door lock
mechanism or reach into the washer during a
steam cycle. Steam can cause severe burns.
Extra Rinse
This option adds an extra rinse to the selected
cycle. Use this option to help ensure the removal
of detergent or bleach residue from fabrics.
• Press the Extra Rinse button to add from 1 to 3
additional rinses to the cycle.
Delay Start
Once you have selected the cycle and other
settings, press the Delay Start button to delay the
start of the wash cycle.
• Turn the knob to increase the delay time in 30-
minute increments, from 1 hour up to 19 hours.
• Once the desired delay time is set, press the
Start/Pause button to start the delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer automatically turns
off after a certain time and all cycle settings are
lost.
Fresh Care
Use this function when you will not be able to
unload your clothes immediately after the wash
cycle ends.
• The drum will tumble periodically for up to 19
hours to prevent wrinkles.
More Options and Settings
Press the Options button and turn the knob to
select the desired option or setting from the menu.
Press the
8
(OK) button to select the options or
change the settings.
More Options
1
Press the Options button.
2
Turn the knob to select the desired option and
press the
(OK) button.
8
3
Turn the knob to select On or Off and press
the
(OK) button to save the option.
8
4
To return to the previous screen, press the
Options button again or press the
N
(Previous) button.
NOTE
• If no action is taken for several minutes after
pressing the Options button, the display reverts
to the previous screen.
TM
TurboWash
Adding this option reduces the cycle time while still
providing similar wash performance to the same
cycle without TurboWash
• For cycles in which TurboWash
automatically selected, the TurboWash
cannot be turned off.
• These cycles are designed for optimum
performance with the TurboWash
applied.
TM
Cold Wash
TM
Add the Cold Wash
option to save energy by
using cooler water. Wash and rinse times are
increased to maintain wash performance.
• Wash time will increase up to several minutes
with this option.
• For best wash results, only wash small loads (less
than 8 lb) with this option.
OPERATION
33
TM
.
TM
is
TM
option
TM
option
Advertisement
Table of Contents
