All Reset - Olympus CAMEDIA C-7070wz Advanced Manual

All reset

Function
SATURATION
JPEG
DUPLICATE
SETTING
TIFF
All reset
This function lets you choose whether or not to save the current camera
settings after the power is turned off. The settings affected by [ALL
RESET] are listed on the next page.
The [ALL RESET] setting ([ON]/[OFF]) applies to all the modes. If [ALL
RESET] is set to [OFF] in one shooting mode, this setting applies to all the
other modes, both shooting and playback.
ON All settings are returned to the factory default settings after the power is
turned off. (factory default setting)
Ex: If [ALL RESET] is set to [ON] and [K] is changed to [SQ1], [K]
returns to the factory default setting ([HQ]) when the camera is turned
on again.
7
OFF The settings made before the power is turned off are saved.
Mode dial
Top menu
Note
• My Mode settings and the settings in the [SETUP] tab in the [MODE MENU]
([ALL RESET], [W], [8] etc.) are saved even when [ALL RESET] is set to
[ON].
120
Factory
default setting Page
±0 P. 82
HQ P. 38
3072 × 2304 P. 35
[MODE MENU] [SETUP]
Ref.
Function
SHQ, HQ
SQ1
SQ2
[ALL RESET]
Factory Ref.
default setting Page
3072 × 2304 P. 35
1600 × 1200
P. 35
NORMAL
640 × 480
P. 35
NORMAL
[OFF] / [ON]
g"Menus" (P. 23)