Advertisement
[+] / [–] | Increase / lower volume |
( ) | Multifunction button |
Microphone | on the back of the remote control |
This provides the best protection and prevents damage.
We recommend you use only the supplied USB cable to charge the battery.
LED charging display | |
Flashing red: | Battery 0–30% full |
Flashing yellow: | Battery 30–70% full |
Flashing green: | Battery 70–99% full |
Steady green: | Battery 100% full |
Remarks on the life of Li-ion batteries
The in-ear headphones come with five different sizes of eartips. It is important to choose the right eartips for your ears to achieve a comfortable and secure fit, good ambient noise attenuation and the best possible sound.
If you are using them regularly, we recommend changing the eartips every three months. Replacement eartips made of silicone and other materials can be ordered from the beyerdynamic spare parts shop: www.beyerdynamic.com/service/spare-parts
The earphones should fit comfortably and securely.
The beyerdynamic MIY app is constantly evolving to customise your Blue BYRD ANC to your own needs with useful functions such as MOSAYC sound personalisation, tracking statistics of your daily listening habits and other settings. If you use MOSAYC sound personalisation, your Blue BYRD ANC will sound even better.
The in-ear headphones are compatible with Bluetooth® playback devices that support the following profiles:
All associated functions are only available if they are supported by the playback device.
Within the A2DP profile, the in-ear headphones support the audio codecs SBC, AAC and aptX Adaptive. The best audio quality is offered by aptX Adaptive.
Please note that only the codecs available in the playback device can be used for audio transmission.
The playback device and in-ear headphones automatically agree on the best mutually available codec in the following order:
Most playback devices do not show which codec is actively in use.
Switching on:
Switching off:
Before you can use the in-ear headphones for the first time, you must pair them with your mobile phone or another Bluetooth-enabled device. The pairing procedure may differ depending on the playback device.
Establishing pairing:
The in-ear headphones are switched off.
If the Bluetooth connection has been lost, the LED briefly flashes blue every 3 s.
Deleting the list of already paired devices:
The Blue BYRD ANC (2nd generation) has three ANC modes:
Selecting ANC mode:
A mode can be skipped by briefly pressing twice, e.g. direct change from Passive mode to ANC mode.
The last selected mode is saved when the unit is switched off.
The in-ear headphones can be paired with up to 8 Bluetooth®-enabled devices. Active connections are possible with up to two devices at a time. However, playback of music and phone operation is only possible with one device at a time. Phone operation has priority over playback of music, i.e. playback of music is interrupted during phone calls.
Priority list when using the playback devices (PD):
PRI. | Profile | Playback devices (PD) |
1 | HFP (phone operation) | PD 1 (device used first) |
2 | HFP (phone operation) | PD 2 (device used second) |
3 | A2DP (playback of music) | PD 1 (device used first) |
4 | A2DP (playback of music) | PD 2 (device used second) |
Setting up multi point:
Using multi point:
You have connected the in-ear headphones with two devices and just activated media playback.
You have connected the in-ear headphones with two devices and have just ended a call.
Increasing/decreasing the volume:
The functions described depend on the playback device and playback device software and may not be available.
Start / pause playback:
Playing the next / previous track:
Fast forward / rewind:
Call up the personal assistant of your smartphone or tablet:
Accepting / ending a call:
Rejecting a call:
Increasing / decreasing the call volume:
All personal data is deleted if the device is reset to the factory settings!
Reset to factory settings:
Function | Operation |
Increase volume |
|
Decrease volume level |
|
Switch on |
|
Switch off |
|
Select Transparency/ANC/ Passive mode |
|
Start/stop media playback |
|
Jump to the next track |
|
Jump to the previous track |
|
Fast forward |
|
Rewind |
|
Accept / end a call |
|
Reject an incoming call |
|
Start personal assistant (Siri, Google Assistant etc.) |
|
Switch voice messages on or off |
|
Reset to factory settings |
|
LED display | Function |
Flashes red/yellow/green | Charging |
Steady green light | Fully charged |
Lights up once red for 1.5 s | Switch off |
Flashes rapidly red | Battery almost empty |
Flashes alternately blue and red | Bluetooth pairing mode active |
Flashes blue briefly every 7 s | Bluetooth connection active |
Flashes blue briefly every 3 s | Bluetooth connection lost |
Flashes blue briefly every 7 s | Media playback active |
Flashes rapidly blue | Incoming call |
Flashes blue briefly every 7 s | Call active |
Lights up pink three times per s | Software update mode active |
To achieve the best possible Bluetooth® sound with your in-ear headphones, please observe the following practical tips:
The unit will not switch on | |
Battery is empty or almost empty. |
|
No audio output | |
There is no Bluetooth connection. |
|
The in-ear headphones do not appear among the available Bluetooth devices on the playback device. | |
The in-ear headphones are switched off. |
|
The in-ear headphones are not in pairing mode. |
|
There is already a Bluetooth connection to another playback device. |
|
Playback volume is too low, although set to maximum on the in-ear headphones | |
The audio signal being played back is too quiet. |
|
The sound is harsh and the bass reproduction too low | |
Insufficient seal on the earphones. | Try out alternative left and right eartips until sound is ideal. |
The wireless range is too low, or the connection is disrupted | |
There is interference with other devices. |
|
Spare parts for the in-ear headphones can be found at www.beyerdynamic.com/service.
Bluetooth® frequency range | 2.400–2.4835 GHz |
Transmitting power | 10 dBm |
Operating temperature range | -10 to +60°C |
Charging temperature range | 0 to +45°C |
Using the serial number, you can register your in-ear headphones online at www.beyerdynamic.com.
Risk of swallowing
Only use the product as described in this product manual. beyerdynamic accepts no liability for damage to the product or injury to persons caused by careless, improper or incorrect use of the product, or by use for purposes not specified by the manufacturer.
beyerdynamic is not liable for damage to USB devices that do not comply with the USB specifications.
beyerdynamic is not liable for damage resulting from connection interruptions due to batteries being empty or too old, or due to exceeding the Bluetooth transmission range.
Please also observe the relevant country-specific regulations before using the product.
High volume levels and long listening times can permanently damage your hearing. Because in-ear headphones are placed directly in the ear canal, they can become 6–9 dB louder than conventional headphones, and this increases the risk of hearing damage.
You can personalise your Bluetooth® headphones with the beyerdynamic MIY app. The app's "Statistics" function records the sound pressure your ears are exposed to over time. However, it only refers to the sound pressure generated through the headphones' speakers and not to that from external sources of noise.
In-ear headphones drastically reduce perception of ambient noise. Using in-ear headphones in road traffic can be potentially dangerous. The user's hearing must not be impaired to the extent that it causes road safety risks.
Active Noise Cancellation (ANC) suppresses outside noise.
For many people, wearing in-ear headphones takes some getting used to because the acoustic perception of their own voice and body as well as the inner ear sounds that occur while walking is different from the "normal" situation without in-ear headphones. However, this initially strange sensation usually diminishes after wearing them for a while.
Dirt on the eartips and the formation of a warm and humid climate in the ear canal can cause an increased level of germs, which can increase the risk of an ear canal infection.
Danger from heat, water and mechanical stress
Excessive heat, water and mechanical stress may cause explosion, heat, fire, smoke or fumes. Injuries and irreversible damage to the battery may result.
Storing the battery
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Beyerdynamic Blue BYRD ANC - 2nd generation IN-EAR HEADPHONES WITH ANC Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Blue BYRD ANC that isn't answered in the manual? Leave your question here.