Screen Lock Settings; Face And Fingerprint Unlock - Kyocera DuraSport 5G User Manual

Password: There is high security using a strong password. Follow the onscreen

instructions to set.

Screen lock settings

You can change the following screen lock-related settings:
NOTE: This menu will not be displayed when None or Swipe is selected. The available
settings menus may vary depending on the screen lock option you have selected.
► From the Security screen, tap
Make pattern visible
You can hide the trace of your pattern as you draw it. This setting appears only when you set
Screen lock type to Pattern.
Lock after screen timeout
Sets the time delay to activate the screen lock feature after the device enters sleep mode. This
setting is available only when you have enabled one of the lock settings.
Power button instantly locks
Activates the screen lock feature by pressing the Power key. This setting appears only when
you set one of the lock settings.

Face and fingerprint unlock

► From the Security screen, tap Face & Fingerprint Unlock.
Face Unlock
You can use your face to unlock your phone. To set up face unlock, follow the onscreen
instructions.
IMPORTANT: Face authentication technology does not guarantee completely accurate
personal authentication and identification. Kyocera assumes no responsibility for
any damages resulting from a third party using your device or inability to use
your device.
NOTES:
• Using your face to unlock your phone is less secure than using a pattern, PIN, or
password. It may be possible for your phone to be unlocked by someone or something
with similar appearance to the registered user's face.
• Face unlock may not work properly in a dark environment.
• Make sure your face is fully visible and not covered by any object, such as a mask, hat,
or sunglasses.
next to Screen lock.
78 Settings