Vox DA10 Owner's Manual page 8

Turn EDIT 1 while pressing BYPASS (EDIT 3)
If the BYPASS LED is lit (the effect is bypassed), you
can hold down the TAP button and turn the EDIT 1
knob simultaneously to adjust the noise reduction
sensitivity.
NOTE: You can't adjust the effect parameters while the BYPASS
LED is lit.
NOTE: When you turn on the DA10/DA20, the EDIT 2, EDIT
3 and Noise Reduction parameters will be automatically
set to the values appropriate to the current selection of
the EFFECTS and STYLE selector switches.
TAP (EDIT 2) and LED
This button enables you to set the speed of a modu-
lation-type effect such as CHORUS or FLANGER the
DELAY time or REVERB length. Simply press the
TAP button twice at the desired interval and the LED
blinks at the specified speed or time.
HINT: To set the time to exactly match the tempo of a song,
press the TAP button several times along with the song.
HINT: You can also further adjust the speed or time, by holding
down the TAP button and turning the EDIT 1 knob.
(This is the EDIT 2 mode)
NOTE: If the BYPASS LED is lit, you won't be able to use the
TAP switch to set the time. (The TAP LED will be dark.)
NOTE: If you turn off the power to the unit, the value set by the
TAP button will be reset to its initial value.
8
BYPASS (EDIT 3) and LED
If you don't want to use an effect, press this button to
turn the effect off (i.e., bypassed). If the effect is by-
passed, this LED will be lit.
NOTE: You can't adjust the effect parameters if the BYPASS
LED is lit.
HINT: While the effect is bypassed, you can adjust the noise
reduction sensitivity by holding down the TAP button
and turning the EDIT 1 knob.
HINT: The bypass setting is remembered even when you switch
modes, switch programs, or turn off the power.
HINT: The Bypass button can be used to modify effect param-
eters (EDIT 3). Press and hold Bypass and simulta-
neously turn the EDIT 1 knob. See the chart on page 14
for what parameters can be controlled.
4. STANDBY switch
When the power is on, the indicator located above
the switch will be lit.