Power Acoustik PD-710B Owner's Manual page 38

DIN radio provision
1. Slide the DIN cage into the kit
and secure by bending the metal
locking tabs down.
2. Slide the aftermarket radio into the
cage until secure. (Figure A)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Reassemble dash in reverse order
of disassembly. (Figure B)
Kit Assembly 99-6700
(Figure A)
(Figure B)
4.2
Notes