LG LY27S3240 Series Owner's Manual page 14

14 INSTALLATION
CAUTION
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching the
doors.
• Do not hold the handle when removing or
replacing the doors as the handle may come off.
• Tools Needed
- Flat-head screwdriver
- Phillips screwdriver
Removing the Hinge Cover
Remove the screws from the hinge cover at the top
of the refrigerator. Lift the hook (not visible),
located at the bottom of the front side of the cover
with a flat-head screwdriver.
Removing the Freezer Door
1
The water supply is connected to the upper
right part of the rear surface of the
refrigerator. Remove the clip in the joint area.
Hold the water supply connection and gently
push the collet
a
line as shown.
NOTE
• Disassembling/Assembling the Water Lines
Collet Tube
b c d
to detach the water supply
Insert line Clip
e
2
Remove the screws from the water line cover
and detach the cover.
f
3
Pull out the water supply lines
the refrigerator. Disconnect all the wire
harnesses . Unscrew the ground wire
h
NOTE
• The number of wire harnesses may vary
depending on the model.
• Ground wire is only present on some models.
4
Rotate the hinge lever
Lift the top hinge
latch .
l
CAUTION
• When lifting the hinge free of the latch, be
careful that the door does not fall forward.
5
Free the hinge from the water lines and wire
harnesses and set it aside.
at the top of
g
counterclockwise.
j
free of the hinge lever
k
.
i