Machine Care - Siemens SN63HX02CE Information For Use

Table of Contents

Advertisement

en Cleaning and servicing
Action
If the appliance
is not going to
be used for a
while, leave the
door slightly ajar.
17.4 Machine Care
Deposits, e.g. from remnants of food
and limescale, can cause your appli-
ance to malfunction. To avoid such
faults and reduce odours, we recom-
mend cleaning your appliance at reg-
ular intervals.
Machine Care combined with ma-
chine care products and machine
cleaners is the right programme for
the care of your appliance.
Phase
Removal of
1
Grease and limes-
cale
2
Food remnants and
deposits
To ensure optimum cleaning perform-
ance, the programme doses the de-
tergents independently of each an-
other during the relevant cleaning
phase. Correct placement of the de-
tergents is necessary here.
Run Machine Care without tableware
if the indicator for Machine Care
lights up on the control panel or if ad-
vised to do so by the display. The in-
dicator will go out after you have run
Machine Care. If your appliance does
not have a reminder function, we re-
commend performing Machine Care
every 2 months.
40
Benefit
This will prevent
unpleasant
odours.
Detergent
Liquid machine care
product or machine
descaler in powder
form.
Machine cleaner
Tip: You can get our tested and ap-
proved Dishwasher Care and Ma-
chine Cleaner for Dishwashers online
at https://www.siemens-home.bsh-
group.com/store or from customer
service.
Machine Care is a programme which
removes various deposits in one
washing cycle. Cleaning takes place
in two phases:
Placement
Appliance interior, e.g.
bottle hung in the cut-
lery basket or powder
in the interior.
Detergent dispenser
Running Machine Care
Notes
Run the Machine Care programme
¡
without any tableware in the dish-
washer.
Only use machine care products
¡
and machine cleaners specially
designed for dishwashers.
Make sure that there are no alu-
¡
minium parts, e.g. extractor hood
grease filters or aluminium pans, in
the interior of the appliance.
If you have not run Machine Care
¡
after 3 washing cycles, the indic-
ator for Machine Care will go out
automatically.
For optimum cleaning perform-
¡
ance, ensure the correct place-
ment of cleaners.

Advertisement

Table of Contents
loading

Table of Contents