Table of Contents
Advertisement
18 OPERATION
OPERATION
Before Use
WARNING
• To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before
operating this appliance.
Operation Overview
1
Sort laundry and load the washer.
• Sort laundry by fabric type, soil level, color and load size as needed. Open the door and load items
into the washer.
• If using single-use detergent packs, or gel or tablet detergents, place them in the drum before
loading the laundry.
2
Add cleaning products.
• Fill the larger ezDispense reservoir with HE (High-Efficiency) liquid detergent. Fill the smaller
reservoir with liquid fabric softener, if desired.
• Use the front detergent compartment of the manual dispenser for liquid or powdered detergent, or
oxygen-based bleach. Place liquid chlorine bleach ONLY in the bleach compartment at the back of
the manual dispenser.
• Do not place liquid or powdered detergent packs, or gel or tablet detergents in the dispenser.
3
Turn on the washer.
• Press the Power button to turn on the washer.
4
Select a cycle.
• Select either a wash only cycle or a wash+dry cycle. To add drying to a wash only cycle, press the Dry
button. (A wash cycle cannot be added after a dry only cycle is selected.)
• Turn the cycle selector knob until the desired cycle is selected and press the
• The preset wash temperature, spin speed, soil level and option settings for the selected cycle are
shown.
• The Wash+Dry cycle must be selected in order to change its default settings.
• Pressing the Start/Pause button without selecting a cycle immediately starts the Wash+Dry cycle
with the default settings.
5
Adjust settings.
• Default settings for the selected cycle can be changed, if desired, using the cycle modifier and
option buttons.
• Not all modifiers and options are available on all cycles. A different chime sounds and the LED does
not light up if the selection is not allowed.
(OK) button.
8
Advertisement
Table of Contents
