Cycle Selection And Start-Up; Under-Counter Dishwashers; Hood Dishwashers; Continuous Washing (*Optional) - PRODIS T1215BT Instruction Manual

•
Press the PROGRAMME SELECTION (2) button repeatedly to select a wash cycle that is suitable
for the dishes to be washed; the cycle LED lights up to indicate the cycle chosen (Fig. 4).
•
To run the programme, press START (3); the CYCLE LED (5) corresponding to the chosen wash
cycle starts to flash.
•
When the cycle is completed, it stays on, fixed.
•
For rapid drying, remove the rack from the machine as soon as the cycle finishes.
•
To stop a wash cycle early, press the START button (3).
•
Press the PROGRAMME SELECTION (2) button repeatedly to select a wash cycle that is suitable
for the dishes to be washed; the cycle LED lights up to indicate the cycle chosen (Fig. 4).
•
Press AUTOMATIC START button (4), the AUTOMATIC START LED (7) lights up
Use the START button (3) if there is no button 4.
•
Lower the hood; the cycle starts automatically and the CYCLE LED (5) corresponding to the
chosen wash cycle starts to flash.
•
When the cycle is completed, it stays on, fixed.
•
For rapid drying, remove the rack from the machine as soon as the cycle finishes.
•
To stop a wash cycle early, press the START button (3).
• This is an extended cycle; the time varies according to the model.
• The cycle duration may be varied as required by pressing START (3) during the wash cycle, to
interrupt the wash and start the rinse phase.
•
Move the washing and rinsing arms at right angles to the edge of the door (Fig.7).
•
Lift each semi-filter by the relative handle.
•
Switch the dishwasher off.
•
Remove the integral filter if present (Fig.7 A).
•
Pull the overflow upwards (Fig.8 B), and wait for the tub to drain completely.
•
If necessary, extract the tub filter and clean (Fig. 8 C).
•
Select the drain cycle using the PROGRAMME SELECTION button (2).
•
If present, remove the integral filter (Fig.7 A).
•
Pull up and remove the overflow (Fig. 9).
•
Close the door/hood.
•
Press START (3) to run the cycle.
•
The machine runs a drain cycle with self-cleaning (*optional) and then switches off.
•
If necessary, extract the tub filter and clean (Fig. 8 C).
INSTRUCTION MANUAL FOR DISHWASHERS
4.4

Cycle selection and start-up

4.4.1 Under-counter dishwashers

4.4.2 Hood dishwashers

4.5

Continuous washing (*optional)

4.6 Removing the integral filter

4.7 Emptying the dishwasher

4.7.1 Appliances with no drain pump

4.7.2 Appliances with drain cycle (*optional)

UK
Page 7 of 12