UK
Referring to Fig.1:
1 ON/OFF LED AND BUTTON
2 PROGRAMME SELECTION BUTTON
3 START BUTTON
4 AUTOMATIC START BUTTON
4a WASHING TEMPERATURE DISPLAY
Short washes
Medium wash
Long wash
Referring to Fig.2
•
Turn on the main power switch and open the external water tap.
•
Check the presence of the overflow.
•
Press ON/OFF (1).
•
In the versions with incorporated water softener (*optional) to start loading press START (3), if
there is no water softener the loading starts automatically when the dishwasher is switched on.
•
The STATE LED (6) flashes red until the level is reached.
•
When the tub level is reached the STATE LED (6) switches off.
•
The green dot in the corner of the TEMPERATURE DISPLAY (4a - 4b) indicates that the washing
nor rinsing water is heating..
•
When the working temperature is reached, the STATE LED (6) stays on, green.
•
The optimal wash conditions have been reached.
Fig. 3
Referring to
, to ensure the correct operation of the dishwasher follow the rules described below:
•
Use a suitable rack, fill without overloading and without overlapping the dishes.
•
Always wipe the dishes before placing in the dishwasher; do not put dishes with dry or solid
residues in the washer.
•
Place the empty dishes in the rack facing downwards.
•
Place plates and the like in the sloping rack, with the inner surface facing upwards.
•
Place the cutlery in the cutlery basket, handle end down.
•
Do not place silver and stainless steel cutlery in the same cutlery basket as this will turn the silver
brown and may corrode the steel.
•
Wash the dishes immediately after use, in order to prevent any residue from hardening and sticking
on them.
•
Use only solid, dishwasher-proof dishes.
Page 6 of 12
INSTRUCTION MANUAL FOR DISHWASHERS
Chap 4 USING THE MACHINE
4b RINSE TEMPERATURE DISPLAY
5
CYCLE LED
6
STATE LED
7
AUTOMATIC START LED (hood only)
Drain cycle
Resin regeneration
Continuous wash
4.2 Switching the dishwasher on
4.1 Key and symbols
4.3
Filling the rack