NEC NP4100WJ User Manual page 28

Table of Contents

Important:

1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-

frequency fluorescent lights can disrupt remote control operation.

2. Be sure nothing obstructs the path between the remote control and the projec-

tor. If the path between remote and projector is obstructed, you can bounce the

remote signal off certain reflective surfaces such as projector screens.

3. The buttons and keys on the projector have the same functions as the corre-

sponding buttons on the remote control. This user's manual describes the

functions based on the remote control.

Note:

*To turn off the projector, press the Power OFF button twice.

**To turn on the projector, press and hold the Power On button for a minimum of

two seconds.

1. Introduction

Table of Contents

Troubleshooting

Np4100w Np4100 Np4100j Np4100g