1
2
1. Transmission oil filler cap
2. O-ring
4. Remove the transmission oil drain bolt and its
gasket to drain the oil from the transmission
case.
9
1. Transmission oil drain bolt
2. Gasket
5. Install the transmission oil drain bolt and its
new gasket, and then tighten the bolt to the
specified torque.
Tightening torque:
Transmission oil drain bolt:
22 N·m (2.2 kgf·m, 16 lb·ft)
6. Refill with the specified amount of the recom-
mended oil. NOTICE: Make sure that no
foreign material enters the transmission
case.
[ECB03380]
9-15
2
1