Removing A Wheel; Installing A Wheel - Yamaha RAPTOR 90 2020 Owner's Manual

3. Remove the blown fuse, and then install a
new fuse of the specified amperage.
WARNING! Always use a fuse of the spec-
ified rating, and never use a substitute ob-
ject in place of the proper fuse. An
improper fuse or a substitute object can
cause damage to the electrical system,
which could lead to a fire.
Specified fuse:
7.5 A
4. Turn on the main switch and start the engine.
5. Install the seat.
6. If the fuse immediately blows again, have a
Yamaha dealer check the vehicle.
EBU34030
9

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel bolts.
[EWB02173]
9-35
1
1. Wheel bolt
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the bolts from the wheel.
5. Remove the wheel.
EBU34042

Installing a wheel

1. Install the wheel with the arrow mark pointing
in the forward rotating direction of the wheel,
and then install the wheel bolts.
1