Advertisement
Ball Chute
3
• Align the tabs at the bottom of the ball
chute with the grooves in the opening of
the motor.
• Turn the ball chute clockwise to lock it into
position. Pull up on the ball chute to be
sure it is secure.
4
• At an angle, insert the closed peg on the
motor into the hole in the base.
Assembly
Motor
• Lower the motor so that the open peg fits
• Insert the battery plug into the socket in the
Hint: If there isn't a socket inside the peg, the
motor/chute assembly is backwards in the
base. Remove the motor/chute assembly and
turn it around. Repeat assembly step 4.
Closed Peg
• Fit the cover over the peg and plug and into
Base Hole
• Insert two screws into the cover and tighten.
4
Groove
5
into the groove in the base.
motor, as shown.
6
the base.
Socket
Plug
Cover
Peg
Plug
Advertisement
