Epson TM-T88V-DT-542 User Manual page 15

English
For models with a pole
Use the following items. The pole, base, and screws are included with the customer display.
Customer display
!
CAUTION:
The pole does not come out of the customer display once it is attached to it. Be sure of its orientation
when attaching it to the customer display.
Pole
1. Attach the base on the TM-T88V-DT with
the three screws. (➀ in the illustration)
2. With the end of the straight pole with a hole
pointing downward, pass the USB cable of
the customer display through the pole and
base. (➁ in the illustration)
3. Attach the pole with the customer display.
4. Align the dowel hole in the pole and the
dowel on the base to attach the pole on the
base. (➂ in the illustration)
5. Connect the USB cable to the USB port.
(U
"Interface" on page 7
Base Screws
)
15