Advertisement
A\Caution: Read this page carefully to ensure safe operation.
Before applying power
For the U.S.A. and Canada
For Australia and Europe
Important!
Units shipped to the U.S.A. and Canada are designed for opera-
tion on
120 volts AC only
Safety precaution for a Polarized AC plug
However, some products may be supplied with a non-pclarized
plug
» CAUTION: to prevENT ELECTRIC SHOCK DO NOT USE
THIS
(POLARIZED)
PLUG
WITH
AN
EXTENSION
CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY
INSERTED
TO PREVENT
BLADE
EXPOSURE
For the United Kingdom
important!
Units
shipped
io
the
U.K.
are
designed
for
operation
on
240 voits AT only
The mains plug must be removed
fram the wall socket prior
to any internal examination
The wires tn this mains tead are coloured in accordance with
the following code
Blue
Neutral
Brown
Live
The wires in this "ans
lead must be connected to the termi-
nals in the piug as follows
Wire colour
Plug terminal marking
Blue
N or Black
Browr:
Lor Red
I
E
Brown to
T—
Live
Blue to
Neutral
Plug
Notes: --—
—
1. If a 13-amp plug is used, this must be fitted with a 5-amp
fuse
2.
If a 3-pin plug with earthing contact is used, no wire must
be connected
to the E terminal
Safety precautions
Important!
: Units shipped to Australia are designed for operation on 240 V
AC only
* Units shipped to Europe are designed for operation on 220 V
AC only
For other countries
Important!
Units shipped to countries other than the above
countries are
equipped with an AC voltage selector switch on the rear panel
Refer to the following paragraph for the proper setting of this
switch
AC voitage selection
This unit operates on 110-120 or 220-240 volts AC.
The AC
i voltage selector switch Type A or Type B on the rear panel is
; set to the voltage that prevails in the area to which the unit
is shipped.
Before connecting the power cord to your AC out-
let, make sure that the setting position of this switch matches
your line voltage.
If not, it must be set to your voltage in ac-
cordance with the following direction
Note:
moe
Our warranty does not cover damage caused
by excessive
line
voltage
due
to improper
setting
of the AC
voltage
selector
* switch
AC voltage selector switch
Type A
& aca2ov~ AC240V~
|
Type B
~_
(Tl
AC110V- <4» AC220V-
120V ~
240V ~
;
Move switch lever to match your line voltage with
i
a small screwdriver or other pointed toa.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
h [CAUTION
|
1
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK).
NO USER-SERVICEABLE
PARTS INSIDE, REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL
!
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED 'DANGEROUS VOL-
TAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN-
STRUCTIONS
IN THE LITERATURE ACCOMPANYING
THE APPLIANCE
Advertisement
