Advertisement
Operations
POWER/STANDBY
indicator lights.
If the next operation key is pressed immediately after the
;
previous key, misoperation may result
@ Installing the batteries in the remote control
unit
1. Remove
the battery compartment
cover.
2. Insert two size ''AA' (R6) batteries confirming the cor-
rect polarity and close the cover in its place.
Note:
-
-
~
The provided batteries are to be used for checking the operation
of the remote control unit, and they may have a short life. When
the remote control unit becomes effective only for short distances
or does nct operate properly, replace the batteries with two new
batteries.
300°
1"
30°
Remote
control
unit
! The signal transmission system used
by this remote control unit is the in-
frared control system
|
Malfunction may occur in case direct sunlight or the light
of a high-frequency lighting fluorescent lamp enters the
remote control light recepter.
In such a case, change the
installation position of the unit so that the malfunction
!
i does not occur.
:
-
4
Advertisement
