Advertisement
Listening to broadcasts
VOLUME
CONTROL
knob
KENWOOD
AMLFM STEREO RECEIVER KRLASSZC
Tipe
Ee |] Pe]
| freeze]
Toe
i
j
Jt
i
t
t
t
I
tt
fo)
A_sPraxeas 8
ee
BAND selector key
9 TUNING key
POWER key
INPUT SELECTOR keys
v
@ To listen to radio broadcasts
1. Press the POWER
key to ON.
2. Press the TUNER INPUT SELECTOR
key.
3. Press the BAND selector key to select FM1, FM2 or AM.
® Every time the BAND selector key is pressed, the receiv-
ing band is switched in order:
=
FM1
a
FM2
>
AM
-
AUTO
key
@ Tuning methods
Auto tuning
When the TUNING
key is pressed, broadcast frequencies are
scanned automatically in the upward or downward direction
until a station is located and tuned in. The stereo/monaural FM
reception mode is set automatically according to the station
1. Press the AUTO key so that the AUTO indicator lights.
2. Press the A (UP) or ~ {DOWN} segment of the TUNING
key.
@ Pressing the A(UP) segment scans broadcast frequen-
cies by varying the displayed frequencies in the upward
direction, and pressing the w (DOWN)
segment scans
by varying the frequencies in the downward
direction.
@ When a broadcasting station is received, the frequency
display
freezes
and
indicates
the frequency
of the
received station
3. If the received station is not the desired station, press
the same segment of the TUNING key again.
®@ Repeat this unit the desired station is received
Manual tuning
Stations with weak signal strength cannot be received by auto
tuning. in such cases, tune in the desired station by manual
tuning.
The
station
will
be
received
in monaural
mode
imonaural
mode
is resistant to noise).
1. Press the AUTO key so that the AUTO indicator is off.
2. Press the A (UP) or \v (DOWN) segment of the TUNING
key.
® Every time the TUNING key is pressed, the displayed fre-
quency varies by one step in the direction indicated by
the pressed segment.
® Holding the TUNING key depressed varies the displayed
frequency
continuously.
3. When the frequency of the desired station is tuned in,
release the TUNING
key.
@
Noise may be heard if the tuned frequency
is not pre-
cisely the same as the frequency of the station. In such
cases, press the A (UP} or ww (DOWN) segment of the
TUNING key to adjust the tuning precisely
Advertisement
