Preparation For Use - Akai ABP-6441 User Manual

For Customer Use
Enter below the Serial No. which is located
On the bottom of the cabinet. Retain this
Information for future reference.
Mode No.
Serial No.
13

PREPARATION FOR USE

Unpacking and Setup
* Carefully remove the unit from the display carton and remove all packing material from the unit itself.
* Remove any descriptive labels that may be found on either the front or top cabinet of the unit. Do not
remove any labels located on either the back or button cabinet of the unit.
* Press the CD door OPEN Button to open the CD compartment door. There is a white card in the CD
compartment which is intended to prevent the CD pickup from moving during shipment of the product,
Remove this card from the CD compartment before use.
Power Sources
Using AC Power
Connect the AC power into Standard household wall outlet. For dual voltage version.
Make sure that the AC VOLTAGE SELECTOR is switched to your local voltage.
Batteries for the unit (not included)
Open the battery compartment and insert six batteries, type R-14, UM-2 or C-cells,
(preferably Alkaline) with the correct polarity as indicated by the + and -
inside the compartment.
Batteries contains chemical substances, so they should be disposed of properly.
Incorrect use of batteries can cause electrolyt leakage and will corrode the compartment or
cause the batteries to burst. Therefore:
Do not mix battery types: e.g. alkaline with carbon Zinc. Only use batteries of the same
type for the set.
When inserting new batteries, do not try to mix old batteries with new ones.
Remove the batteries if the set is not be used for a long time.
, , , ,
symbols
14