Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Knightsbridge OLG1W
Summary of Contents for Knightsbridge OLG1W
- Page 1 INSTALLATION & MAINTENANCE MANUAL OLG1W...
- Page 2 These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: OLG1W SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
- Page 3 This product is Class I and must be earthed This product series is IP54 rated ALLATION INSTALLATION If this luminaire is being used in conjunction with an external PIR or sensor, please confirm with the acturer of the sensors that they are compatible with LED lamps Note: This product is not suitable for installation in or near a coastal or marine environment.
- Page 4 • Using the backplate as a template, mark the location for, and drill the fixing holes ensuring Using the backplate as a template, mark the location for, and drill the fixing holes ensuring not to not to infringe with any gas / water pipes or electrical cables infringe with any gas / water pipes or electrical cables •...
- Page 5 WARNING This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. GENERAL Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not use aggressive cleaning products or solvents which may damage the product.
- Page 6 AVMAY21_V1...
Need help?
Do you have a question about the OLG1W and is the answer not in the manual?
Questions and answers