Download Print this page

Knightsbridge WPCWA Installation & Maintenance Manual

Adjustable led wall pack with photocell sensor

Advertisement

Quick Links

WARNING
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
GENERAL
This product contains a light source of energy efficiency class D to Regulation (EU) No. 2019/2015 and (UK)
2021 No. 1095.
Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not
use aggressive cleaning products or solvents which may damage the product.
This product contains a non-replaceable LED light source.
Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not
use aggressive cleaning products or solvents which may damage the product.
Do not use any source of high-pressure washers to maintain or clean this luminaire.
This product is non-dimmable.
This product should be dismantled for disposal when it reaches the end of its life. Please see website for
dismantling instructions. This product should be recycled in the correct manner when it reaches the end of its
life. Check local authorities for where facilities exist.
WARRANTY
This product has a warranty of 5 years from date of purchase. Failure to install this product in accordance with
the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will
invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place
WPCWA INSTRUCTION MANUAL.indd 1-3
WPCWA INSTRUCTION MANUAL.indd 1-3
of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation
costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve
the right to alter product specification without prior notice.
SUPPLIED BY:
(UK)
ML ACCESSORIES LTD, UNIT E CHILTERN PARK,
BOSCOMBE ROAD, DUNSTABLE LU5 4LT,
WWW.MLACCESSORIES.CO.UK
(EU) AUTHORISED REPRESENTATIVE
SLV LIGHTING GROUP,
DAIMLERSTRASSE 21-23,
52531 ÜBACH-PALENBERG, GERMANY
EMAIL: EPREL@GROUP.SLV.COM
MADE IN CHINA
230V
>80
IP65
CRI
50Hz
INSTALLATION & MAINTENANCE MANUAL
-20~
45°C
TA
134
JBJAN24_V1
WPCWA
25/01/2024 17:17:35
25/01/2024 17:17:35

Advertisement

loading
Need help?

Need help?

Do you have a question about the WPCWA and is the answer not in the manual?

Questions and answers

Summary of Contents for Knightsbridge WPCWA

  • Page 1 IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will JBJAN24_V1 invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place WPCWA INSTRUCTION MANUAL.indd 1-3 WPCWA INSTRUCTION MANUAL.indd 1-3 25/01/2024 17:17:35...
  • Page 2 • Round cable should be used for the mains supply. The use of flat cable will cause water ingress to the fitting achieve loop-in/loop-out wiring out wiring • Unscrew the four front screws to gain access (see Fig. 1) WPCWA INSTRUCTION MANUAL.indd 4-6 WPCWA INSTRUCTION MANUAL.indd 4-6 25/01/2024 17:17:36 25/01/2024 17:17:36...