Makita GA043G Instruction Manual page 10

Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Always operate with two hands.
Do not use the wheel guard for cut-off
operations.
Noise
The typical A-weighted noise level determined according to EN62841-2-3:
Model
GA042G
GA043G
GA044G
GA045G
GA046G
GA047G
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) determined according to EN62841-2-3:
Work mode: surface grinding with normal side grip
Model
GA042G
GA043G
GA044G
GA045G
GA046G
GA047G
Ni-MH
Li-ion
Intended use
The tool is intended for grinding, sanding, wire brushing and
cutting of metal and stone materials without the use of water.
Sound pressure
level (L ) : (dB(A))
pA
84
84
84
84
84
84
Vibration emission (a ,
h AG
3.3
3.7
4.5
3.3
3.7
4.5
10 ENGLISH
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and
waste accumulators and batteries, as well as
their adaptation to national law, waste elec-
trical equipment, batteries and accumulators
should be stored separately and delivered
to a separate collection point for municipal
waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Sound power level Uncertainty (K) :
(L ) : (dB(A)) (dB(A))
WA
92
92
92
92
92
92
2
) : (m/s ) Uncertainty (K) : (m/s
1.5
1.5
1.5
1.5
1.5
1.5
3
3
3
3
3
3
2
)