Advertisement
9
MAINTENANCE
Cleaning the nozzle
Nozzle can be removed
for easy cleaning. Slide
the two nozzle release
latches outwards
Cleaning the brushes
Push both brush release
buttons and remove the
brush assembly. Brushes
can be rinsed under water
to remove debris (Max 40°C)
Warning: Always remove the tanks before carrying out brush/nozzle maintenance
Remove nozzle by pulling
straight out and rinse under
running water (max. 40°C)
To replace brushes, align the
post with square hole on the
bottom of the machine. Push
brushes firmly at both ends
until it locks into place
Remove any debris from
squeegee by wiping with
a damp cloth
To replace nozzle ensure latches
are in the out position, insert
nozzle into middle section of
base. While holding the nozzle
in place, slide latches inward to
lock into place
Advertisement
