Advertisement
Quick Links
Model #
384KFDC
DISTRESSED ANTIQUE CHERRY FINISH
Rustic Sideboard
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Gluing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves and drawers on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
Natural characteristics
such as knots provide a
natural feel.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Gluing Hints
completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any parts
10/05
Advertisement
Related Manuals for Whittier Wood Products John Greenleaf 384KFDC
Summary of Contents for Whittier Wood Products John Greenleaf 384KFDC
- Page 1 Model # 384KFDC DISTRESSED ANTIQUE CHERRY FINISH Rustic Sideboard Service Policy: We will replace any parts which are defective, missing or damaged Assembly Instructions during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
- Page 2 384KFDC Rustic Sideboard — Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list below. A — Bottom Shelf — Qty. 1 G — Back — Qty. 2 B — Base — Qty. 1 H —...
- Page 3 384KFDC Rustic Sideboard — Parts List (cont.) N — Wood Dowel — Qty. 6 X — Tack Glide — Qty. 2 ZF — Double Magnetic Catch O — Rafix Cam — Qty. 4 Kit — Qty. 1 Y — Adjustable Glide —...
-
Page 4: Tools Required
384KFDC Rustic Sideboard ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Head Screwdriver, Mallet or Padded Hammer, Wood Glue, Tape Measure FIG. 1 1. Lay out the wood parts in their approximate location to aid in the identification and assembly. Page 4 — 384KFDC... -
Page 5: Top View
TOP VIEW FIG. 2 READ CAM-LOCK INSTRUCTIONS AND RAFIX ATTACHMENT SYSTEM INSTUCTIONS NOW. 2. Glue three Wood Dowels (N) in each Side Screw four Rafix Bolts (P) into the Top (F). Assembly (C & E). Screw Cam Connectors (Q): Tap in two Rafix Cams (O), with notch facing •... - Page 6 FIG. 3 3. Attach the Base (B) to the Bottom Shelf (A) with four Cam Housings (R). See FIGURE 3. FIG. 4 4. Attach upper and lower Sleepers (D), with notches facing in, to the Left Side Assembly (C) gluing the Wood Dowels (N) and securing each with Screws (S).
- Page 7 FIG. 5 5. Rotate Left Side Assembly and set in place on the right Side Assembly (E) and repeat step 4 to secure pieces together. See FIGURE 5. FIG. 6 6. Lay the Top (F) on a protected surface and lower the Side Assemblies down over the Rafix Bolts (P) in the top.
- Page 8 x 22 FIG. 7B FIG. 7A Y&Z FIG. 7C Y&Z FIG. 7D 7. To square the unit, lay it face down on a protected surface, measure from top left to bottom right and from bottom left to top right . Measurements should be equal. If the line longer, tap bottom of Left Side Assembly (C) until measurements are equal.
- Page 9 FIG. 9 9. Attach two Drawer Sides (H) to the Drawer End (I) with Screw (T) through the predrilled holes in the sides. The grooves for the Drawer Bottom must line up. Slide the Drawer Bottom (J) into the grooves. Attach the Drawer Face (K) to the Drawer Sides (H) using Screw (T). See FIGURE 9. FIG.
- Page 10 FIG. 11 11. Install Drawer into the unit by aligning the outer slide section with the inner tracks attached to the side assemblies. As the drawer is pushed in you will feel resistance. Continue pushing the drawer in until it is fully closed. FIG.
- Page 11 Leave empty for now FIG. 13B Align this hole Align this hole FIG. 13A 13. Attach two Minaret Hinges (ZG) to each Door (M). Align the outermost hole in each hinge with the outermost pre-drilled hole in the back of the door and secure with Screw (ZH). See FIGURE 13A.
- Page 12 FIG. 15A FIG. 15B FIG. 15C 15. Attach a Magnetic Catch Plate (ZF) to the upper inside corner of each door where they will make contact with the Double Magnetic Catch. Use the flat head screws in the magnetic catch kit to hold each plate in place.
- Page 13 1-800-653-3336 Outside U.S. or Canada: 541-687-0213 Fax: 541-687-2060 • Email: info@whittierwood.com Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A. Gluing Hints Carefully read the glue manufacturer’s label and follow all instructions. These are general hints. Refer to the instruction sheet for detailed information on gluing your specific product.
Need help?
Do you have a question about the John Greenleaf 384KFDC and is the answer not in the manual?
Questions and answers