Download Print this page

Whittier Wood Products John Greenleaf Metropolitan 466W Manual

Advertisement

Quick Links

466W
Metropolitan
Chair Frame
(2 pack)
467W
Avignon
Chair Frame
Shown with 413W Wood Seat
NOT INCLUDED
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
(2 pack)
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning. (Finishing Hints
enclosed with chair instructions.)
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any
Rev. 6/05

Advertisement

loading

Summary of Contents for Whittier Wood Products John Greenleaf Metropolitan 466W

  • Page 1 Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Metropolitan Whittier Wood Products customer service department directly (by phone, fax, mail or Chair Frame email) for replacement parts. Hours: Our friendly customer service staff (2 pack) can be reached Monday-Friday 7:00 a.m.
  • Page 2 Metropolitan & 467 Avignon Chair — Parts List Before beginning assembly, check that the quantities of the parts received match those on the parts list below. " GG — Back Corner Block — Qty. 2 1¾" HH — Front Corner Block — Qty. 2 AA —...
  • Page 3: Tools Required

    Metropolitan & 467 Avignon Chair ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Screwdriver, Wood Glue, Hammer DD & QQ IMPORTANT: READ GLUING HINTS BEFORE ASSEMBLING! For 467W: Decorative edge of front apron must be toward the bottom front. FIG. 1 FIG. 1A 1) Spread glue in the three dowel holes in the Left Front Leg (EE).
  • Page 4 Angled end of side stretcher. FIG. 3 3) Spread glue in the dowel holes in angled ends of the Side Stretchers (DD & QQ) and attach to back leg assembly, grooves down, with the square edge towards the front. Spread glue in the elongated holes in the back legs. Tap the angled ends of the Side Aprons (BB) into the elongated holes with the grooves facing in.
  • Page 5 Corner Block Corner Block GG & HH FIG. 5 FIG. 5A 5) Before attaching corner blocks, verify that the side aprons are seated snugly against the front and back legs. Spread a light layer of glue in the upper and lower notches of a Back Corner Block (GG) and insert in the grooves in the back and side aprons.
  • Page 6 Page 6 — 466W & 467W...

This manual is also suitable for:

John greenleaf avignon 467w