Advertisement
85991KFRS1 Chelsea Chair
ASSEMBLY INSTRUCTIONS
A
E
x6
B
x6
C
x6
1) Glue three Wood Dowels (C) into each of the holes in the Left Leg Assembly (1) as
shown in FIGURE 1. Attach the Back (3) to the leg assembly with two dowels and
two Barrel Bolts (A) and Barrel Nuts (B). Tighten bolts with the Hex Wrench (E).
Attach the Front Apron (4) to the leg assembly over the dowel and fasten in place
with Barrel Bolt (A) and Barrel Nut (B).
Glue three Wood Dowels (C) into the holes in the Right Leg Assembly (2) as shown
in FIGURE 1. Attach the leg assembly to the Front Apron (4) and Back (3) as be-
fore.
D
x4
2) Slip the Seat (5) down between the legs onto the seat braces. Attach to the leg assemblies
with Phillips Screws (D) through the two predrilled holes in each end of seat into the frame
as shown in FIGURE 2.
x1
85991KFRS1 – Page 3
Advertisement
