Table of Contents
Advertisement
Safety
Instructions
Disclaimer
Before using this product, please read and fully
understand this document and all related documents of
this product. After reading this document, please keep
it well for future reference. Failure to properly operate
this product could cause serious injury to yourself or
others, or damage to this product and other property. By
using this product, you are deemed to have understood,
acknowledged and accepted all terms and contents of
this document. The user undertakes to be responsible
for his/her actions and all consequences arising
therefrom. EcoFlow is not liable for all losses caused
by the user's failure to use this product according to the
disclaimer and safety instructions.
EcoFlow reserves the right of final interpretation of this
document and all related documents of this product
where permitted by laws and regulations. These
documents are subject to update, revision or termination
from time to time without prior notice, please visit
EcoFlow website for the latest product information.
I.Installation
1.
The installation and operating environment must meet
relevant international, national, and local standards, and
are in accordance with the local laws and regulations.
2.
Ensure the charge point is protected against lightning
and heavy rain.
3.
Keep the product away from explosive or flammable
materials, chemicals, vapors and other hazardous
objects.
4.
The mounting structure where the equipment is installed
must be fire resistant. Do not install the equipment on
flammable building materials.
5.
Ensure that the installation surface is solid enough to
bear the weight of the equipment.
6.
Reserve sufficient clearance around equipment to ensure
sufficient space for installation and heat dissipation.
7.
Adaptors or conversion adapters are not allowed to be
used. Cord extension sets are not allowed to be used.
II.Wiring
1.
Before connecting to the power source, make sure
that the main circuit is disconnected. Wear insulated
protective equipment when operating, otherwise serious
personal injury can occur.
III.Use and Disposal
1.
Do not touch the socket pin when the unit is powered
on.
2.
Do not use the charge point if it shows any visible
product damage such as cracks, abrasions, bare leakage,
and other visible defects. Contact a qualified technician
immediately at the first sign of such damages.
3.
Do not attempt to disassemble, repair or refit the
charge point. If necessary, please contact the qualified
technician. Improper operation will result in device
damage, electric leakage and other hazards.
4.
In case any abnormal condition happens, please turn off
incoming power supplies immediately.
5.
During charging, do not drive the EV. Charge only when
the EV is stationary. For hybrid cars, charge only when
the engine is switched off.
6.
Keep children away from the charge point.
7.
Keep the charge point socket clean and dry. If it gets
dirty, please wipe it with a clean, dry cloth.
8.
Our packaging materials are environmentally friendly
and can be recycled. Please put the packaging in
applicable containers to recycle it. Do not dispose of
this device with household waste. It should be taken to
a suitable facility for recycling electrical and electronic
devices. For more detailed information about recycling
of this device, please contact your local city/town council
office or your household waste disposal service.
Technical
Specifications
Model
EF-PP-H01-1
Input & Output specifications
AC input
400V～16A per phase
(three-phase)
(L1/L2/L3/N/PE)
AC output
400V～16A per phase,
(three-phase)
max. 11kW, mode 3
Rated frequency
50 Hz
Approved grid
TN, TT
configurations
TypeA+6mA DC
RCD
detection
Communication
Frequency range:
2400～2484.5 MHz
Wi-Fi (2.4G)
Maximum output power:
20 dBm
Frequency range:
2412～2480 MHz
Bluetooth
Maximum output power:
10 dBm
Environment requirement
Ambient
－40ºC to +70ºC
temperature for
storage
Ambient
－30ºC to +50ºC
temperature for
operation
Relative humidity
5% to 95%,
(condensing)
condensation-free
Basic information
Net weight
3.3 kg
Charging box:
Dimensions
283x178x99 mm
Charging cable: 5 m
Altitude
≤ 2000 m
Pollution Degree
3
IP rating
IP65
Compliance
EN61851-1
standard
EN61851-21-2
|1
Advertisement
Table of Contents
