Setting The Time And Date; To Stop Alarm - LENCO SCD-6000 Instruction Manual

SETTING THE TIME AND DATE

1. Long press the MENU/INFO button
Turn the TUNING button backward or forward to
Turn the TUNING button backward or forward to select
2.
Press the SELECT button to confirm it
Turn the TUNING button backward or forward to select
3.
Press the SELECT button to confirm it
4.T
he date digit flash on the display.
forward to
adjust date digit.
The
5. month digit flash on the display.
forward to
adjust month digit.
The
6. year digit flash on the display.
forward to
adjust year digit.
7. The hour digit flash on the display.
Press the SELECT button to confirm it .
8.
The minute digit flash on the display.
Press the SELECT button to confirm it ,
digit.
9. Press the STANDBY button to show
- Note: When do the setting in the menu, press the MENU button to return back to previous step.
SETTING THE ALARM / THE ALARM MODE AND SNOOZE
1. Press the STANDY button and then long press the MENU/INFO button.
2. Turn the TUNING button backward or forward to select "Main menu ". Press the SELECT button to confirm it.
3. Turn the TUNING button backward or forward to select "Alarms". Press the SELECT button to confirm it.
4. Turn the TUNING button backward or forward to select "Alarm 1". Press the SELECT button to confirm it.
5. Turn the TUNING button backward or forward to select " Enable". Press the SELECT button to confirm it.
6. Turn the TUNING button backward or forward to select " Daily". Press the SELECT button to confirm it.
7. Turn the TUNING button backward or forward to select " Time".Press the SELECT button to confirm it.
8.
The hour digit flash on the display.
Press the SELECT button to confirm it
9.
The minute digit flash on the display.
Press the SELECT button to confirm it.
10.Turn the TUNING button backward or forward to " Save". Press the SELECT button to confirm it.
The " Alarm Saved " is shown on the display.
Same procedure applies for Alarm 2 .
12.
13. Press STANDBY button,
are shown on the display.
SNOOZE ( REPEAT ALARM )
When the alarm sounds at the preset time, you can turn off the sounds temporarily by pressing the STANDBY button.
Turn the VOLUME button backward or forward to select the snooze time 5,10,15,30 minutes.
The ALARM CLOCK indicators are blinking on the display

TO STOP ALARM

1. Press the STANDY button and then long press the MENU/INFO button.
2. Turn the TUNING button backward or forward to select "Main menu". Press the SELECT button to confirm it.
3. Turn the TUNING button backward or forward to select "Alarms ". Press the SELECT button to confirm it.
4. Turn the TUNING button backward or forward to select "Alarm 1". Press the SELECT button to confirm it.
5. Turn the TUNING button backward or forward to select " Enable". Press the SELECT button to confirm it.
6. Turn the TUNING button backward or forward to select " Off" Press the SELECT button to confirm it.
7. Turn the TUNING button backward or forward to select " Save" Press the SELECT button to confirm it.
The " Alarm Saved " is shown on the display.
8. Same procedure applies for Alarm 2 .
9. Press STANDBY button,
at power on mode
.
.
Turn the TUNING button backward or
Press the SELECT button to confirm it
Turn the TUNING button backward or
Press the SELECT button to confirm it
Turn the TUNING button backward or
Press the SELECT button to confirm it
Turn the TUNING button backward or backward or forward to
Turn the TUNING button backward or backward or forward to
the correct time and date on the display.
Turn the TUNING button backward or forward to
Turn the TUNING button backward or forward to
2 ALARM CLOCK indicators
ALARM CLOCK indicators are disappered on the display.
2
,
select " System settings".
Time/Date".
"
Time/Date".
" Set
.
.
.
and count the time backwards.
GB 3
Press the SELECT button to confirm it
adjust hour digit.
adjust minute digit.
.
adjust hour digit.
adjust minute