Table of Contents
Advertisement
basic
position
Wi-Fi
Remote start
Factory setting
Factory setting (may vary depending on device type)
1
Display text
Selection
Cn0
Cn0 - Cn1
rc1
rc0 - rc2
re
Start with
YES
Confirm with
Basic settingsde
Description
Turn wireless network
connection on or off.
The "Cn0" level turns off the
wireless network
connection.
This basic setting is only
available after you have
connected the device to the
Connected to the Home
Connect app.
→ "Home Connect",
page 40
→ "Remote Start ", page
41 enable or disable.
The following settings are
possible:
¡With the setting "rc0"
the function is permanently
deactivated.
¡With the setting "rc1"
The function can be
selected using the button.
→ "Activate Remote Start",
page 41
¡With the setting "rc2"
the function is permanently
activated.
This basic setting is only
available after you have
connected the device to the
Connected to the Home
Connect app.
→ "Home Connect",
page 40
Reset changed settings to
factory defaults. The settings
must be made for initial
commissioning.
39
Advertisement
Table of Contents
