Bosch SBV6ECX00E User Manual page 39

Basic setting
Hot water
TimeLight
Starter program
Factory setting (may differ depending on device type)
1
Display
Choice
text
A:00 A:00 - A:01
1
S:01 S:00 - S:01
1
SP:01 SP:00 - SP:01
1
Basic settingsNL
Description
Set cold water connection or
hot water connection. Only
set the device to Hot water if
the hot water is prepared in
an energetically favorable
manner and a suitable
installation is available, e.g. a
solar boiler with circulation
pipe. The water temperature
must be a minimum of 40 °C
and a maximum of 60 °C.
Turn on hot water
"A:01" or disable
"A:00".
Enable or disable TimeLight.
During the program run,
status information about the
time setting, the program or
the remaining time is
projected on the floor under
the appliance door. The
indication is not visible with a
pre-sliding plinth plate or
with high installation with a
flush-fitting furniture front.
At position "S:00" the
TimeLight is switched off.
Set preset program when
switching on the device.
¡When set to "SP:00".
the last selected program
is preset when the
appliance is switched on.
¡When set to "SP:01".
When switching on the
appliance, the Eco 50°
program is preset.
39