Table of Contents
Advertisement
Fill in the rinse aid up to the max
2.
mark.
If rinse aid has overflowed, remove
3.
it from the rinse tank.
Overflowing rinse aid can lead to
excessive foam formation during
the rinse cycle.
Close the lid of the rinse aid
4.
reservoir.
aThe lid clicks into place with an audible click.
11.2 Setting the amount of rinse
aid added
If streaks or water stains remain on
the dishes, change the amount of rinse
aid.
press.
1.
To open the basic settings,
2.
press.
aThe display shows Hxx. a
The display shows
Press repeatedly until
3.
the display shows the factory-set
value r05.
Press repeatedly until the
4.
appropriate amount of rinse aid
has been added.
– A low stu rinse
cycle
and reduces Sc
Dishes.
Max
3 seconds
.
fe gives that
he rinse aid too
hlieren on the
– A higher level adds more rinse
aid to the rinse cycle, reduces
water stains and produces a
better drying result.
To save the settings,
5.
Press for 3 seconds.
11.3 Switch off the rinse aid
system
If the rinse aid refill indicator bothers
you, for example if you use combined
detergents with a rinse aid
component, you can switch off the
rinse aid system.
Tip:The function of the rinse aid is
limited with combined detergents. If
you use rinse aid, you usually achieve
better results.
press.
1.
To open the basic settings,
2.
press.
aThe display shows Hxx. a
The display shows
Press repeatedly until
3.
the display shows the factory-set
value r05.
4.
Press repeatedly until the
display shows r00.
To save the settings,
5.
Press for 3 seconds.
aThe rinse aid system is switched off
switches on and the rinse aid refill
indicator is deactivated.
Rinse aid systemde
3 seconds
.
29
Advertisement
Table of Contents
