Sony Trinitron KV-27XBR95S Operating Instructions Manual page 75

Click the rocker control.
The mode display tums red.
Press the rocker control up or down to select the VTR
selector mode you have set on the Remote
Commander. (When the VTR1-2-3 MDP selector is set
to VTR2, select "VTR 2.")
Each time you press the rocker control up or down, "VTR 1,"
'VTR 2," "VTR 3," "MDP" and "OFF" appear in sequence.
EXDIRECT PLAY
VIDEOL: VIR 2
VIDEO2: OFF
a rneO OFF
VT DP
serect@> eetuanD exer Git)
Click the rocker control.
The direct play setting is complete.
To set direct play for other connected video equipment
Repeat steps 7 — 10.
To return to the previous menu
Press the rocker control up or down until the cursor points
to" > MENU."
Then click the rocker control.
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normal screen.
Press MENU on the Remote Commander.
Chapter 3: Using Advanced Features | 75
JOPURUWU0D oOUIOY siqemWesborg OY HUSH ¥