Sony Trinitron KV-27XBR95S Operating Instructions Manual page 47

Setting NR (picture noise reduction) ON or OFF
Follow these instructions to reduce picture noise.
Remote Commander
CH
Press MENU.
The main menu appears, and the cursor points to "PROG
PALETTE."
secectD actu ep extt GOD
Click the rocker control.
The program palette menu appears.
Press the rocker control up or down until the cursor
points to "VIDEO."
Click the rocker control.
The VIDEO screen appears.
(VIDEO
eA Do ae
en pee
BRIGHT eevee
SHARP _[iHURRIiprenns
a LOW
sececr> atrumep extr GED
Press the rocker control up or down until the cursor
points to "NR."
VIDEO
PICTURE iiMHliHliitiitesn
HUE Ssenwioen tse
TRINITONE: LOW
NR: OFF
)
sececte> nerves ep ex1t GERD)
Click the rocker control.
The mode display tums red.
Press the rocker control up or down to select "ON" or
"OFF."
Select "ON" to reduce picture noise.
Select "OFF" to restore the normal picture.
Click the rocker control.
The setting is complete.
To return to the previous menu
Press the rocker contro! up or down until the cursor points
to " > MENU."
Then click the rocker control.
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normal screen
Press MENU on the Remote Commander.
aunrid sty Guysnipy
Chapter 3: Using Advanced Features | 47