Turning The Power On/Off - Vivitar Vivicam 4000 User Manual

Turning the Power On/Off

Load the battery and insert an SD card before starting.
Turning the power on
Press the POWER button to turn the power on.
The viewfinder LED lights green and the
camera is initiated.
When the power is turned on, the camera
will start in the mode that is currently
selected by the mode dial.
Turning the power off
Press the POWER button to turn the power off.
24-E
The camera will automatically power-off if the camera has not been used
for a defined period of time (one minute.) To resume operation, turn the
power on again. Refer to the section in this manual titled "Auto PoFF" in
the Setup Menu (Basic tab) for further details.
When the power is turned on, it may take several seconds to charge the
flash. While the flash is being charged, the viewfinder LED lights orange.
The camera is not ready until the flash has charged. The camera is
ready when the viewfinder LED is off.