Protecting Images/Video Clips - Vivitar Vivicam 3945s User Manual

Protecting Images/Video Clips

The "PROTECT" function allows you to set the data to read-only to prevent
images from being erased by mistake.
1. Slide the mode switch to [
2. Press the
menu. Select [PROTECT] with the
/ /
button.
3. Use the
setting, then press the OK button.
[ONE IMAGE]: Protect one image/
video.
[ALL IMAGES]: Protect all images/
videos (at once).
[EXIT]: Exit from this menu.
4. Use the
then press the OK button.
Press the
playback mode.
The protect icon
each protected video and image.
Canceling protection
To cancel protection for an image or video, display the image or video for which
you wish to remove the protection.
1. Perform the above steps 1~3.
2. Use the
EN-46
].
button to enter [PLAY]
buttons, then press the OK
/ buttons to select the desired
/ buttons to select [LOCK],
button to return to the
is displayed on
/ buttons to select [UNLOCK], then press the OK button.
PROTECT
/
ONE IMAGE
ALL IMAGES
EXIT
BACK :
LOCK
UNLOCK
SET :