Download Print this page

Yamaha ELECTONE DK-40C Manual page 11

Hide thumbs Also See for ELECTONE DK-40C:

Advertisement

The
Electone's
special
tremolo
is produced
by a rotary
speaker
that
actually
spins just behind
the rotary speaker grille on the side of the cabinet.
Tremolo selector is complemented by a continuous tremolo speed control knob.
TREMOLO
SPEED
TREMOLO
TREMOLO
When
the speed control
is set to its maximum
position,
the Tremolo
will turn the speaker at normal
revolution.
The Chorus will turn
it at one
revolution.
Once either
tablet is switched on, it takes several seconds for the rotary
speaker to attain the standard speed. This is also true when
switching
to
a slower
speed
(Tremolo
to Chorus),
the
speed variation will be heard in the music.
If you
wish
an instant tremolo or chorus sound, be sure
to switch
on that tablet well
in advance
of the speaker
selector.
For special
selections you
can
use this speed
variation
by switching
the speaker on first, the Tremolo
or Chorus switch later.
Note:
Only
Tremolo
is produced
when
Tremolo
and
Chorus
are
switched on simultaneously.
UPPER
VOICE
Lets you divert upper manual voices from the main to the
rotary speaker.
LOWER
VOICE
Does the same for lower manual voices.
FLUTE
SPLIT
This tablet feeds
Flute voices
of the upper
and
lower
manuals
and preset Combinations
to the rotary speaker.
Combined
with
other
manual
voices
through
the
main
speaker it creates a rich, singing blend.
Note:
Only Flute Split is produced when Flute Split and Upper or
Lower Voice are switched on simultaneously.

Advertisement

loading