Using The Macro Mode; Using The Flash - Vivitar Vivicam 3675 User Manual

Using the macro mode

Use the macro mode to shoot a close-up of the subject, such as flowers or insects.
1. Turn the camera on.
2. Turn the mode dial to the
mode.
3. Press the button.
The icon appears on the LCD monitor
and status LCD.
4. Compose the picture.
5. Press the shutter button down halfway, then
press it the rest of the way down.
To cancel macro photography at any time,
press the button again.
NOTE
• When shooting a close-up of the subject, you can compose the picture by using the viewfinder
or the LCD monitor. However, composing the picture by using the viewfinder in macro mode
may cause images composed to be off-center due to the parallax phenomenon. We recom-
mend that you use the LCD monitor instead to compose the picture in this situation.
• After one shot is taken, the macro mode is turned to off.

Using the flash

The flash is designed to function automatically in dark places. You can take a
picture with the suitable flash setting according to the different conditions. If you
change the flash setting, the camera will remain in that setting even if the camera
is turned off.
1. Turn the camera on.
2. Turn the mode dial to the
mode.
3. Press the button located on top of the cam-
era repeatedly until your desired flash mode
appears.
4. Press the shutter button down halfway, then
press it the rest of the way down.
mode or the
mode or the
E
21