Troubleshooting - Vivitar Vivicam 355 User Manual

Troubleshooting:

If you experience difficulty with your camera, check the following -
1. No Power
2. No Image is taken
3. Flash does not operate
4. Images are too dark with flash
5. Image is blurred
6. Can't erase an image
7. LCD monitor is off
8. No display on the status LCD
9. Card Full is displayed
10. The object is too dark
11. The object is unclear
12. Images are too yellow
13. Camera does not recognize
my CF card
14. I cannot use the video
camera mode
15. I am using "Easy-CD Creator
(version 4.X or below) and I
have problem installing the
camera driver, what should I
do?
The batteries are depleted, or battery polarities are
inverted (backwards)
Internal memory, or CF card, is full
Camera set to Flash Off mode. Battery power is low.
The subject is too far away. Flash was obscured.
The lens is dirty or has condensation
It is protected. Unprotect it.
The Mode Dial is set incorrectly
The camera has auto-powered off
No CF card is inserted, or the card is full
Change the position to avoid backlit problem. Use
eV compensation. Try 1eV or 1.5eV
Environment is too dark. Use flash or tripod.
Change the White Balance to other settings
Power the camera off and on. Verify that the CF
card is fully inserted
Make sure you have selected 'silent
video' mode
• Vivicam 355 Digital Camera's installation CD
includes an "auto-check" program to detect if
your PC has any software conflicts between
other devices and the camera. If the
"auto-checker" detects existence of software
conflicts, it will recommend and guide the
user to download updated drivers from
appropriate website to solve the conflict problem.
• If you cannot download the driver try the
following procedures:
1. Insert the Vivicam 355 Digital Camera
installation CD into the CD-ROM drive
2. Look for the file "recover.bat" stored on the CD
3. Double-click the file to initiate the recovering
process
4. Restart your computer
5. Install the camera driver again
35