Operating The Monitor - Philips EVNIA 32M2C5500W User Manual

USB hub
4
To comply with International energy
standards, the USB hub/ports of this
display are disabled during Standby and
Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function in
the "ON" state, please go to OSD Menu,
then select "USB standby mode", and
switch it to the "ON" state. Somehow
if your monitor resets to the factory
setting, ensure to select "USB standby
mode" to "ON" state in the OSD menu.
5 USB charging
This display has USB ports capable of
standard power output including some
with USB charging functions (identifiable
with power icon
USB
ports to charge your Smartphone or
power your external HDD, for example.
The display must be powered ON at all
times to be able to use this function.
Warning
USB 2.4Ghz wireless devices, such
as wireless mice, keyboards, and
headphones, may result in decreased
efficiency of radio transmission of USB
3.2 devices. Should this happen, please
try the following methods to help
reduce the effects:
• Try to keep USB 2.0 receivers away
from a USB 3.2 connection port.
• Use a standard USB extension cable
or USB hub to increase the space
between your wireless receiver and
the USB3.2 connection port.
). You can use these

2.2 Operating the monitor

1
Description of the control buttons
Press to switch power on.
Press more than 3 seconds to
switch power off.
Access the OSD menu.
Confirm the OSD adjustment.
Adjust the Game Setting.
Adjust the OSD menu.
Change the signal input
source.
Adjust the OSD menu.
SmartImage Game menu.
There are multiple selections:
Standard, FPS, Racing, RTS,
Movie, LowBlue Mode,
EasyRead, Economy,
SmartUniformity, Game 1
and Game 2
When the monitor receives
HDR signal, SmartImage will
show the HDR menu. There
are multiple selections in
this menu:HDR Game, HDR
Movie, HDR Vivid, DisplayHDR
400, Personal, and Off.
Return to previous OSD
7
level.