Setting Up The Monitor; Installation - Philips EVNIA 32M2C5500W User Manual

2. Setting up the
monitor

2.1 Installation

1 Package contents
*HDMI
*Different according to region
2
Install the base
1. To well protect this monitor and
avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(3) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
Quick Start
32M2C5500W
Register your product and get support at www.philips.com/welcome
Power
*DP
*USB A-B
3. After attaching the base, erect
the monitor with both hands
holding the monitor together with
styrofoam firmly. Now you can pull
out the styrofoam. When you pull
out the styrofoam, do not squeeze
the panel .
Warning:
This product is a curve design. When
attaching/detaching the base, place the
protective material under the monitor
and do not press down on the monitor.
5
3
1
2