Table of Contents
Advertisement
Physical Function
4
Tilt
Swivel
-30°
Height adjustment
Warning
•
To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
•
Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
20°
-5°
+30°
130mm
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
Display base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. While keeping the release button
pressed, tilt the stand and slide it
out.
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always
contact manufacturer for wall-mount
installation.
Warning:
This product is a curve design, when
attaching/detaching the base, place the
protective material under the monitor
and, to avoid damage, do not press
down on the monitor.
11
Advertisement
Table of Contents
