Image / Video Clips; Setup Menu; Playback Of Images And Video Clips; Camera Operations - Vivitar Vivicam 2005 User Manual

Vivitar vivicam 2005: user manual

Table of Contents

3.1 Capturing Images and Video Clips

The Vivicam 2005 features three ways to capture images -

1) Single Shot mode. Single-shot mode is the most common mode used for capturing

individual still images. Single shot is also the default mode for the V2005. Whenever

the camera is turned on, it will be in single-shot mode.

2) Video mode.

camera will revert to single-shot mode.

3) Continuous (burst) Mode. Burst mode allows you to capture a sequence of four images

in succession. The V2005 will capture one frame (every 1.2 seconds) up to four frames.

Note that after each burst capture, the camera will revert to single-shot mode.

The Vivicam 2005 features an integral four-mode flash that can be used in single-shot mode.

The flash is not available in burst or video modes. The four flash modes are: automatic,

automatic with red-eye reduction, off, and on (also known as fill-flash.) Hint: for faster camera

operation and increased battery life set the flash to OFF if you will not be using it.

1) White balance: Auto, Sunny, Cloudy, Fluorescent, Tungsten

2) Exposure mode: Automatic, with manual exposure compensation

Exposure compensation range: +/– 1.5 eV

(This allows you to manually under-expose, or over-expose an image)

3) Metering: Full field (100%), central portion (25%), central-spot (4%)

4) Self-timer: 10 second delay

5) Sounds: enable or disable camera tones (beeps)

6) Automatic power-off: You may specify the power-off time as one or three minutes, or

you may disable auto-power off completely

7) Multi-language: You may select a language for the on-screen display - English, French,

Italian, German, Spanish, Portuguese, or Chinese

3.3 Playback of images / video clips

1) Playback display: You may playback images individually, or in a matrix of nine

simultaneous images.

2) Delete and format: You may delete the current image, delete all images, or format

memory (internal memory or memory card.)

3) Display Brightness: Adjustment the LCD brightness level +/- 1 step.

Capture short video clips.

(Also see section 4.4 for additional detail)

Note that after each video captured, the

Table of Contents