Dvr Function Control - Vivitar DVR-518 User Manual

DVR Function Control

To power on the camcorder you need to flip open the LCD Screen. The
Power button is situated on the inside of the camcorder.
Power on
Press the Power button to turn on your DVR.
The LCD monitor will light up indicating that your DVR is ready for use.
Power off
Press the Power button to turn your DVR camcorder off. The DVR camcorder will
switch off.
If the DVR camcorder is not in use or in an operation mode for 60 seconds it will
switch off automatically.
When there is insufficient battery power, a "Low Battery" message will appear on the
LCD screen. The camcorder will automatically power off a few moments later
12
.