Cautions - Haier AB25S2SC1FA Operation Manual And Installation Manual

Cautions
Disposal of the old air conditioner
Before disposing an old air conditioner that goes out of use,
please make sure ifs inoperative and safe. Unplug the air
conditioner in order to avoid the risk of child entrapment.
It must be noticed that air conditioner system contains
refrigerants, which require specialized waste disposal. The
valuable materials contained in an air conditioner can be
recyded. Contact your local waste dispose] center for proper
disposal of an old air conditioner and contact your local
authority or your dealer if you have any question. Please
ensure that the pipework of your air conditioner does not get
damaged prior to being picked up by the relevant waste
disposal center, and contribute to environmental awareness
by insisting on an appropriate, anti-pollution method of
disposal.
Disposal of the packaging of your new air conditioner
Ali the packaging materials employed in the package of your
new air conditioner may be disposed without any danger to
the environment.
The cardboard box may be broken or cut into smaller pieces
and given to a waste paper disposal service. The wrapping
bag made of polyethylene and the polyethylene foam pads
contain no fluorochloric hydrocarbon.
All these valuable materials may be taken to a waste collecting
center and used again atter adeguate recycling.
Consult your local authorities for the name and address of the
waste materials colIecting centers and waste paper disposal
services nearest to your house
Safety Instructions and Warnings
Before starting the air conditioner, read the information given
in the Users Guide carefully. The User% Guide contains very
important observations relating to the assembly, operation
and maintenance of the air conditioner.
The manufacturer does not accept responsibility for any
damages that may anse due to non-observation of the
following instruction.
Damaged air conditioners are not to be put into operation.
In case of doubt, consult your supplier.
Use of the air conditioner is to be carried out in strict
compliance with the relative instructions set forth in the
User's Guide.
Installation shall be done by professional people. Don't instali
unit by yourseff.
For the purpose of safety, the air conditioner must be propetly
grounded in accordance with specifications.
Always remember to unplug the air conditioner before
opening inlet grill. Always grip plug firmly and pull straight
out from the outlet.
All electrical repairs must be carried out by qualified
electricians. Inadeguate repairs may result in a major source
of danger for the user of the air conditoiner.
Do not damage any parts of the air conditioner that carry
refrigerant by piercing or perforating the air conditioner's
tubes with sharp or pointed items, crushing or twisting any
tubes, or scraping the coatings off the surfaces. If the
refrigerant spurts out and gets into eyes, it may restia in
serious eye injuries.
Do not obstruct or cover the ventilation grille of the air
conditioner. Do not put fingers or any other things into the
inletioutlet and swing louver.
Do not allow children to play with the air conditioner. In no
case should children be allowed to sit on the outdoor unit.
When the indoor unit is tumed on, the PCB will test if swing
motor is 0.K., and then fan motor will start up.So there is a
few seconds to wait.
In cooling mode,the flaps will swing automatically to a fixed
position for anti-condensating.
This appliance is not intended for use by persons (including
children) with reducedphysical, sensory or menta' capabilities,
or lack of experience and knowledge unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
Specifications
The refrigerating drcuit is leak-proof.
For ali the models in this manual, the all-pole disconnexion
connection method should be appbed in the power suppIy.
Such means for disconnection must be incorporation in the
fixed wiring.
Cooling
indoor temperature
max. DB/WB
min. DBANB
32/23`C
18/14t
Outdoor temperature
max. DB/WB
DBMB
46/26t
m in .
10/6"C
max. DB/WB
27"C
indoor temperature
min. DBNVB
15"C
Heating
max DB/WB 24/18t
Outdoor temperature
min.
'
DBANB -15t
f the supply cord is damaged, it must be replaced by the
manufacturer or its service agentor a similar qualified person.
f the fuse on PC board is broken please change it with the
type of T 3.15A /250VAC.
The wiring method should be in line with the local wiring
standard.
The waste battery shall be disposed properly.
The indoor unit installation height is at least 2.5m.
The air breaker and the power switch should installed the
conveniently reachable pleace for user.
The specification of power cable is HO5RN-F3G 4.0mm2.
The specification of cable between indoor unit to outdoor unit is
HO5RN-F4G 2.5mm 2
4