Web Interface
Access the Web Interface
You can access your camera's web interface and change the default static IP to DHCP using the
following software:
AVer IP Finder
PTZApp 2
AVer IP Finder
1. Download and install AVer IP Finder to your computer from AVer Download Center.
(https://www.aver.com/download-center).
2. Make sure your camera and computer are connected to the same network.
3. Open AVer IP Finder. Click Search.
4. To change the default static IP 192.168.1. 168 to DHCP, select your camera's checkbox from the
list of devices.
5. Enter the default password aver4321.
6. Select DHCP.
7. Click Apply. AVer IP Finder will seach for devices again and your camera's IP address will change.
8. Double-click on your device row to access the web interface.
9. For first-time login, enter the default password aver4321. You'll be prompted to set up a new
account and password.
Use 6-10 characters, upper and lowercase letters, numbers and special characters (* ! % + = ,
- _ ^ / @ . ~).
If you forgot your password, use PTZApp 2 to reset the password to the default password
aver4321.
24