Sony DAV-HDX265 Operating Instructions Manual page 28

iiiiii O C_<ili_ o iiil
: :: _IIIIIIIIIIIIIIIII'FUNCTION
iiiiii i::::_::i_;f::i_;;i_ ¸i;:!;¸:;¸_::::t_
_l,/€./e, _.:,
P
i!
MENU
Selecting the connected
component
You can use a VCR or other components
connected to the TV/VIDEO jacks on the rear
panel. Reli:r to the operating instructions
supplied with the components for further
inl;armation.
Press FUNCTION repeatedly until "TV/
VIDEO" appears in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the l\41owing sequence.
DVD --+ TUNER FM --+ TUNER AM --*
TV/V1DEO --+ DMPORT --+ AUDIO --+ ...
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a
component connected to the TV/VIDEO jacks
on the rear panel or to the AUDIO IN jack on the
fl'ont panel. This is not a malfunction and will
depend on the component connected.
To prevent tl_is, you can change the input level
li'om the sound of the other components.
1
Press FUNCTION repeatedly until "TV/
VIDEO" or "AUDIO" appears in the
front panel display.
Press SYSTEM MENU.
2
3
Press ,I,/4, repeatedly until
"ATTENUATE" appears in the front
panel display, then press @ or -).
4
Press t'/,1, to select a setting.
The default setting is underlined.
• "ATT ON": allennales the inpul level.
The outpul level is changed.
• "ATT OFF": normal inpul level.
5 Press @.
The selling is made.
6
Press SYSTEM MENU.
The system menu turns olT.
28 GB