Joinwit JW8001 User Manual page 12

JW8001 Bench-top Stabilized Laser Source User Manual V220722
Figure 6-1 Power-on display interface
Switch the channel
Press the switch button of "CH1" and "CH2" channel on the device panel, and the
button indicator will light up. The corresponding channel will be displayed in the
upper left part of the interface, as shown in Figure 6-2.
Figure 6-2 Channel switch key
Set light source parameters
Press The Menu/Esc key to Enter the main Menu;
Press the rotate button to switch to the item to be set;
Press the Mode/Enter key to Enter the sub-menu;
Press the Menu/Esc exit key to exit the current setting state;
Press the F/C key to switch coarse/fine tuning according to actual needs, during
parameter setting.
10