Philips 42PF9630A/37 Manual page 49

PHILIPS soft_oupg_ Appli_tio_
Upgrade busy ...
Automatic software upgrade procedure
O Power off your TV and remove all memory devices.
0 insert the USB portable memory that contains the downloaded software
upgrade.
Switch on yourTV with the POWER button on your remote control.
O At startup the TV will scan the USB portable memory until it finds the
update content.The TV will automatically go to the upgrade mode.After a
few seconds it will display the status of the upgrade procedure.
Warning:
o You am not allowed to remove the USB portable memory during the software
upgrade procedure.!
o In case of a power drop during the upgrade procedure, don't remove the USB
portable memory from the 7_/The TV will continue the upgrade as soon as the
power comes bad<.
o If you try to upgrade to a software vemion lower than the current version, a
confirmation will be asked. Downgrading to older software should only be done in
case of real necessity
o If an error occurs during the upgrade you should retry the procedure or contact
your dealer:
When the software upgrade was successful, remove the USB portable
memory and restart your TV with the POWER button on your remote
control.
Your TV will start up with the new software.
Note: Once the upgrade is _nished use your PC to remove the TV software from
your USB portable memory
SOl war pgr_de
Manual software upgrade procedure
O
0
For a manual software upgrade copy the "autorun.upg" file in a directory
called "Upgrades" located in the root of the USB portable memory.
insert the portable memory that contains the downloaded software
upgrade.
Select Software
Upgrade
in the installation menu. Go to Local
u pgrades/appiJcations.
The TV will list all compatible images available on the USB portable
memory and display the data for each selected upgrade image.
Select the correct upgrade image and press the red color button to start
the upgrade.
Your TV will restart and will automatically go to the upgrade mode.After a
few seconds it will display the status of the upgrade procedure.
Warning:
If you try to upgrade to a software version equal or lower than the current version,
a confirmation will be asked. Downgrading to older software should only be done
in case of real necessity
_]D When the software upgrade was successful, remove the USB portable
memory and restart your TV with the POWER button on your remote
control.
Your TV will start up with the new software.
47